一.Product description : LT-900 is a water-soluble Polyether the non-silicon defoamer, with excellent bubble and defoaming capacity can be widely applied to film, imaging and Wastewater Treatment Process.
二.Product characteristics :
1, excellent water-soluble and not leave any oil, and has an excellent washed;
2, bubble ability, defoaming ability to rapidly;
3, low-consumption;
4, broad operating conditions, acid can be used.
三, product performance :
1, An appearance : easy flow of liquid
2, PH : 6.0-7.0
3, diluent : water
四.Quality indicators :
Item Determination of Value
Appearance Milky white or colorless liquid
Color (Hazen) ≤ 80
Cloud Point (C) 21.5 ° C
Water ≤ 0.5%
Proportion 0.80-0.95
Silicon content I did not check out
PH value (1% aqueous solution of 25 ° C) 6.5
五.The method of operation :
1, starts with a contour water dilution and shaking them so fully emulsified;
2, add before adding 1 - 2 ml / L to Bath, to inhibit the formation bubble;
3, when the foam, according to Bath sexual different foaming, add the 0.2-1.0ml / L Zhi diluted defoamer.
六. Packaging : 20L / barrel
七. Valid : one year
八.Safety precautions : not edible, the operation will need to wear gloves; Electroplating chemicals with a majority of corrosive, noxious and toxic, storage and use of the process to pay particular attention to safety, when they need to comply with the abandoned waste treatment, the relevant principles |
